DRY FIREWITH EASE

BETA
Loading…

Confirm safety before practice

Verify the firearm is unloaded, remove live ammunition from the practice area, and use a safe direction and backstop.

The microphone cannot verify these checks. Confirmation applies to this app session.

Safety check Required before recording

Safety first

Verify unloaded; remove live ammunition from the area; use a safe direction and backstop.

Opening your saved gun profiles…

About this practice

PRACTICE GUIDE

Repeated trigger press

Count separate recognized trigger clicks and see the time between them.

Example settings shown. Return to setup to choose your counts and timing.

SIMULATED EXAMPLE · NO LIVE MICROPHONE · NOTHING IS SAVED

Clicks2
Shots2
Left1

MICROPHONE INPUT

72relative level

Microphone input detected.

Practice started. Listening for trigger clicks.

● Microphone connected

Active time 1.30 s

2 · Recognized · 1.30 s

Interval since previous click: 0.80 s

Trigger pull · 1.30 s · split 1.30 s

  1. Trigger pull · 1.30 s · shot · score 95/100
Silent example · 1× timing

3 clicks · random 2–5 s delay · app beep on. Safety already confirmed; microphone preparation time varies.

What it measures

Accepted click count and the intervals between consecutive clicks.

How it works

  1. Choose the number of clicks and your ready delay.
  2. After one start signal, perform separate trigger presses as your equipment permits.
  3. Listening continues without a new beep for every click. Review appears at the target.

Good to know

Reset and handling sounds should not count as shots. Pause stops capture; Resume excludes paused time.

Before you startLearn Trigger pull. Optional reset/noise examples can help reject other clicks. Verify unloaded, remove live ammunition and use a safe direction and backstop.

The app measures detected sounds. It cannot verify unloaded status, aim or safe handling.